Termómetro Plegable Checktemp® 4- HI151-Red-No $53.900
Volver a los productos
Termómetro Plegable Checktemp® 4 - HI151-Green-Yes $91.950
Haga Click para agrandar
Categorías: , , , , , ,

Termómetro Plegable Checktemp® 4 – HI151-Blue-No

SKU: HI 151-2

$53.900

+ IVA

Disponible Pronto

Notifícame cuando esté disponible!

Disponible Pronto

The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 °C (572 °F). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.

  • CAL Check to verify meter performance
  • Waterproof to IP67 Standards
  • Wake on motion
Comparar
Añadir a lista de deseos

CARACTERíSTICAS DEL PRODUCTO

HI151 Checktemp®4 Temperature Tester

Ergonomic Design with Rubberized Grip

Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.

 

Waterproof Durable Casing

The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.

 

Penetration Probe

The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.

 

HI151 Checktemp®4 Temperature Tester

Instrument Quality Certificate for Traceability

HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 oC) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate

 

CAL-Check

With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.

 

Wake on Motion Sensor

The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.

 

Checktemp®4 Temperature Tester – HI151

 

HI151 Checktemp®4 Temperature Tester Family

 

Peso 0,3538291 kg
0 comentarios
0
0
0
0
0

Valoraciones

Borrar filtros

No hay valoraciones aún.

Sé el primero en valorar “Termómetro Plegable Checktemp® 4 – HI151-Blue-No”

Tu dirección de correo electrónico no será publicada. Los campos requeridos están marcados *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5

Código HI151-2
Intervalo -50.0 a 300 °C / -58.0 a 572.0 °F
Resolución 0.1 °C (-50.0 a 199.9 °C); 1.0 °C (200.0 a 300.0 °C)
0.1 °F (-58.0 a 199.9 °F); 1.0 °F (200.0 a 572.0 °F)
Exactitud ± 0.4 °C (-50.0 a -30.0 °C); ± 0.2 °C (-30.0 a 170.0 °C)
± 0.4 °C (170.0 a 199.9 °C); ± 1.0 °C ± 1 dígito (200.0 a 300.0 °C)
±0.8 °F (-58.0 a -22.0 °F); ±0.4 °F (-22.0 a 199.9 °F)
±1.0 °F (200.0 a 392.0 °F); ±2.0 °F ± 1 dígito (392.0 a 572.0 °F)
Sonda De acero inoxidable con punta de penetración; 103 x 3 mm (diám.) (4.06 x 0.12’’ diám.)
Calibración De fábrica
Batería Ión-litio CR2032 (2) / aprox. 4,000 horas de uso continuo
Apagado automático 1 min, 2 min (valor por defecto), 8 min, 60 min.u OFF
Condiciones ambientales -30.0 a 50.0°C (32.0 a 122.0°F)
Dimensiones 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”)
Peso 85 g (3.0 oz)
Clasificación de la carcasa IP67, carcasa flotante

Descargar Manuales 

SERVICIO TÉCNICO HANNA

En HANNA® INSTRUMENTS contamos con un centro de Servicio Técnico autorizado donde usted podrá contar con la asesoría de Ingenieros capacitados que le brindarán los servicios de mantenimiento, reparación y validación de nuestros equipos.

Mantenciòn
VER MÁS
Despacho
VER MÁS
Consultas
VER MÁS
    MANUALES
    TUTORIALES
    GARANTÍA